Alexor PC9155D-433 Guide d'installation télécharger pdf (Page 72)

PC9155 Wireless Alarm System

5-48

[075] Second Keypad Options

[076] Third Keypad Options

[077] LCD Message

Enter a 32 character message. If anything other than blanks are programmed into this section, the keypad times out to this message instead of the Time and Date dis-

play. Any option or feature that overrides the clock display also overrides the LCD message. An override by the system is not counted against the message duration

programmed in section [078]. This message can be programmed in Installer Programming or using DLS.

[078] Downloaded Message Duration Options

Enter a 3 digit number. Valid entries are 001-255 seconds. 000 = Unlimited Duration.

This section is used to program the number of times a LCD message (programmed in section [077]) must be cleared from the LCD displays (by pressing any key)

before it will no longer be displayed. If programmed on the system, the LCD keypad displays the message when not in use. Programming 000 in this section will

result in the message never clearing. This could be used as a greeting (residential) or a company message (commercial). This overrides the settings of Clock Display

options in section [075].

[996] Reset Labels to Factory Default

Resets all custom labels to the factory defaults. See this section in the Programming Work Sheets for details.

[997] Keypad Version

Entering this section displays the keypad version. The keypad version is displayed as a 4-digit decimal entry.

E.g., Entry is 1234 = Version 12.34. This is a read-only value.

Option Description

[1]

ON: Local Clock Enabled. When the keypad is idle, the date and time are displayed until a key is pressed.

OFF: Local Clock Disabled. When the keypad is idle, the display shows current system status.

[2]

ON: Local Clock Displays 24 Hr Time. The local clock displays time in 24hr format (i.e., 00:00 - 23:59).

OFF: Local Clock displays AM/PM Time. The local clock displays time in 12hr format (i.e., 12:00 AM - 12:00 PM).

System time ([][6][Master Code][1]) is programmed in 24hr format and is not affected by this setting.

[3]

ON: Auto Alarm Scroll Enabled. When the bell is active, or when an alarm is in memory while armed, the keypad automatically overrides the local

clock and scrolls through (displays) all alarms.

OFF: Auto Alarm Scroll Disabled. Alarms do not override the local clock and display alarms.

[4]

ON: Language Selection Accessible from any Menu. Pressing and holding the scroll keys “< >” simultaneously will enter Language Selection from

any menu.

OFF: Language Selection Accessible from Installer Menu Only. Pressing and holding the scroll keys “< >” simultaneously will enter Language Selec-

tion from Installer Programming ([

][8]) only.

[5]

ON: Power LED Enabled. The keypad power LED may be used to indicate AC present or absent status.

OFF: Power LED Disabled. The keypad power LED shall remain off for all conditions.

[6]

ON: Power LED Indicates AC Present. The LED is ON when AC is present. The LED is OFF when AC is absent.

OFF: Power LED indicates AC Absent. The LED is OFF when AC is present. The LED is steady ON when AC is absent.

[7]

ON: Alarms are Displayed while Armed. Alarms occurring when the system is armed are displayed.

OFF: Alarms are NOT Displayed While Armed. The keypad does NOT indicate that an alarm has occurred on the system while armed. When the

system is disarmed, the keypad displays the zone(s) that went into alarm during the armed period.

[8]

ON: Auto Scroll of Open Zones is Enabled. The keypad overrides the local clock display and displays all open zones including bypassed zones

when the system is disarmed.

OFF: Auto Scroll of Open Zones is disabled. The keypad does NOT override the local clock display to display all open zones.

Option Description

[1]-[4]

For Future Use

[5] ON: Late to Open Prompts are Enabled. The “Late to Open” enable/disable prompts in [][6] user functions are available in the menu.

OFF: Late to Open Prompts are Disabled. The “Late to Open” enable/disable prompts are not available.

[6] ON: Power Save Mode ON. After 10 seconds of no activity the keypad display and status LEDs turn off. If the user is accessing [] menus, the sys-

tem waits for the user to exit before starting this timer. The keypad exits power save mode when a key is pressed, entry delay begins or the system

goes into alarm. This feature is intended to reduce power consumption during AC failure or battery only operation.

OFF: Power Save Mode OFF. The keypad is always active.

[7]-[8]

For Future Use

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Alexor PC9155D-433 Guide d'installation Page 72

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Alexor PC9155D-433