Alexor PC9155D-433 Guide d'installation Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 88
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
PC9155 Wireless Alarm System
4-4
Digit 4 indicates/selects one of the following DLS connections:
4.2 DLS Programming
4.2.1 Local Programming with PC-Link
Follow the steps below in the sequence indicated.
4.2.2 Remote Programming via Telephone Line
Refer to section [401] DLS Downloading for setup details.
4.3 Installer Programming
Enter [][8][Installer Code].
The system prompts for a 3-digit programming section number (refer to Chapter 5 for programming details).
Option
Double Call
Sect [401] Opt 1
Call Back
Sect [401] Opt 3
User Call Up
Sect [401] Opt 4
#Rings
Sect [406]
1

000
2

008
3

008
4

008
Step
1
Ensure front cover is removed and the system is powered up.
i
PC-Link connections are ‘hot-swappable’. GPRS/Ethernet module connections are not 'hot-swappable'
and the PC9155 should be powered down before connecting or disconnecting this module.
Step
2
For systems with a GS2065 or TL265GS module installed, disconnect the PC-link connector from the PC9155
module side first.
Step
3
Connect the PC-Link cable between the computer (with DLS Software installed and running) and the header pins
on the alarm system.
Connecting the DLS PC to the alarm system automatically initiates a DLS session.
If the DLS session is not automatically initiated, enter [][8][Installer Code][499][Installer Code][499] to
manually initiate PC-Link (Refer to the DLS software help file for programming details).
Upon completion of the session, remove the PC-link cable from the alarm system, power down, and reconnect the
cable for the GPRS/Ethernet module (if installed).
i
After downloading a 2-way wireless key serial number to the PC9155, a button must be pressed on the wireless
key before it will become operational.
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 87 88

Commentaires sur ces manuels

Pas de commentaire