DSC Alexor Page 6 of 7
Testing Your System
NOTE: Inform your Monitoring Station when you begin and end system testing.
Alarm Central Station: 1-800-452-3555.
Siren and Keypad Display Test
This test activates all display pixels and indicator lights on the keypad and does a 4-second
check of the siren.
1. Press * 6, then enter your Master Code.
2. Press 4.
The following will occur:
-The system activates the siren output on medium volume for 2 seconds followed by
full volume alarm for 2 seconds. All display lights and LCD pixels will turn on.
- The Ready, Armed, Trouble and Power LED’s will flash for the duration of the test.
4. To exit the function menu, press #.
Keypad Low Battery
The flashing trouble icon on a keypad will indicate that keypad has a low battery.
WT4901 Siren Battery Test (If installed on system)
To determine which siren has a low battery, press and hold the test button located at the
front of the siren, for 5 seconds.
- If the siren sounds for 4 seconds, the batteries are good.
- If the siren doesn’t sound, the batteries are low.
Walk Test
Walk Test mode allows you to test the operation of each detector in the system. While in
Walk Test mode, the Ready, Armed, and Trouble LED’s will flash to indicate that the Walk
Test is active. The Walk Test can be terminated at anytime by re-entering * 6 + Master Code
+ 8 on the keypad. The system will also automatically terminate the Walk Test on
completion; it will sound an audible warning (5 beeps every 10 seconds), beginning 5
minutes before the termination of the test.
1. Before testing, ensure that the system is disarmed and the Ready light is on.
2. Press # and close all zones to return the system to the Ready state.
3. Press * 6, then enter your Master Code.
4. Press 8.
5. To test the zones, activate each detector in turn (e.g., open each door/window or
walk in motion detector areas).
The system will display the following message when each zone (detector) is activated:
“Secure System Before Arming < >”, or “Secure or Arm System”. Use the < > buttons to
view which zones are open. The message will disappear when the zones are closed.
(28 pages)
(24 pages)
(88 pages)
(32 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels