Alexor WT4901 Manuel d'utilisateur télécharger pdf (Page 4)

DSC Alexor Page 4 of 7

4. Enter 4-digit user code

5. Press # to exit.

To Delete a User Access Code:

1. Press * 5, then enter Master Code.

2. Use the scroll < > buttons to find the specific code.

3. Press *.

4. Press *.

5. Press # to exit.

Note: The keypad will display the user number with a letter “P” if a user code has already

been programmed.

Chime Mode

Your system can alert you to the opening of a door while it is disarmed by using the CHIME

feature. When activated, three beeps will sound at the keypad whenever a door is opened.

Press CHIME button for 2 seconds, or * 4 to enable or disable the chime feature. The

CHIME icon will appear in display. The system will sound 3 beeps when feature is turned

on, or one long tone to indicate the door chime is off.

Time & Date Programming

1. Press * 6, then enter your Master Access Code.

2. Press 1.

3. Enter the time in 24-hour format, using military time (HH:MM).

4. Enter the date (MM:DD:YY).

5. Press # to exit programming.

Keypad Adjustments

Brightness and Contrast

The keypad has 4 different brightness/contrast levels.

1. Press * 6, then enter your Master Access Code.

2. Use the < > buttons to scroll to either Brightness Control or Contrast Control.

3. Press * to select the setting you want to adjust.

4. a) Brightness Control: There are 4 backlighting levels. Use the < > buttons to scroll to

the desired level.

b) Contrast Control: There are 10 different display contrast levels. Use the < >

buttons to scroll to the desired contrast level.

5. The level is automatically saved when you press # to exit.

Buzzer Level

The buzzer provides an audible confirmation of a pressed button or that a command to the

panel has been executed. The keypad has 21 different buzzer levels. A level of 00 disables

the buzzer.

1. Press * 6, then enter your Master Access Code.

2. Use the < > buttons to scroll to Buzzer Control, then press * to select.

3. Use the < > buttons to scroll to the desired level. The level is automatically saved

when you press # to exit.

1 2 3 4 5 6 7

Pas de commentaire

Alexor WT4901 Manuel d'utilisateur Page 4