Alexor WT4901 Manuel d'utilisateur télécharger pdf (Page 3)

DSC Alexor Page 3 of 7

Bypassing Zones

Use the zone bypassing feature when you want to arm the system, but skip a zone that you

want to leave open or requires service. Bypassed zones will not be able to sound an alarm.

Zones cannot be bypassed once the system is armed. Bypassed zones are automatically

cancelled each time the system is disarmed and must be bypassed again, if required, before

the next arming.

Bypassing Zones

1. Press * 1.

2. Scroll to the desired zone number using the < > keys, then press * to select the

zone, or directly enter the 2-digit number of the zone you wish to bypass.

3. Press # to exit bypass mode and return to Ready state.

4. Continue with arming the system.

Recalling Bypassed Zones

To recall the last set of bypassed zones:

1. Press * 1.

2. Press 9 9.

3. Press # to exit bypass mode and return to Ready state.

4. Continue with arming the system.

Alarm Memory

When an alarm occurs, the Memory indicator (and Fire indicator, if applicable) will turn on.

To view which sensor(s) generated the alarm, press * 3. Use the scroll < > buttons to view

the sensors in memory. Press # to exit.

To clear the memory, arm and disarm the system.

Access Codes

Master Access Code

The master code is the only code that can add and delete other user codes and perform

other various functions (such as entering date and time) on the alarm system. The master

code can be changed, but cannot be deleted.

To change the Master Access Code:

1. Press * 5, then the current Master Code.

2. Press 40.

3. Enter the new 4-digit Master Code.

4. Press # to exit.

User Access Codes

The system will allow up to 16 individual user codes. As codes are added and deleted, keep

a list in a safe location for reference. An accurate list will help track codes as future changes

are made.

To Add or Change a User Access Code:

1. Press * 5, then enter Master Code.

2. Use the scroll < > buttons to find the specific code.

3. Press * to select.

1 2 3 4 5 6 7

Pas de commentaire

Alexor WT4901 Manuel d'utilisateur Page 3