Alexor WT8989 Manuel d'utilisateur télécharger pdf (Page 12)

11. Trouble Conditions

When a trouble condition is detected, the Trouble ( ) indicator will turn on and the keypad will beep

every 10 seconds. Press the [#] button to silence the beeps. Press [

,][2] to view the trouble condition.

The Trouble ( ) indicator will flash. Use the scroll [<][>] keys to view troubles.

12. Trouble Acknowledgement

When the Troubles Inhibit Arming feature is enabled, the Trouble Acknowledgement feature may be

used to acknowledge and override the existing troubles, so the system can be armed. To use this fea-

ture, press to enter the Trouble menu. Scroll left or right and press or

when the keypad displays, “Trouble Acknowledgement.” An override event will also be logged, thus

identifying the user. To override open, faulted or tampered zones use the Zone Bypass feature

().

13. Alarm Memory

When an alarm occurs, the Alarm Memory message will be displayed. To view which sensor(s) gen-

erated the alarm, press [

,][3]. For the system keypad use the scroll [<][>] buttons to view the sensors

in alarm memory. Press [#] to exit. To clear the memory, arm/set and disarm/unset the system.

If an alarm sounded while armed/set, the system will automatically go to alarm memory when you

disarm the system. In this instance, you should proceed with caution, as the intruder may still be

within the building/premises.

14. Door Chime

To turn the door chime function on or off, press and hold the Chime button for 2 seconds or

press [

,][4]. The system will sound 3 beeps to indicate the door chime is on, or one long tone to indi-

cate that door chime is off.

Trouble Comments Action

Alternate

Communicator Trouble

Indicates SIM Card Lock, 3G Network Trouble, Ethernet Trouble,

Central Station Receiver Trouble, Supervision Trouble, and SMS

Config Trouble. Press [<][>] to scroll through individual troubles.

Call for service.

For Ethernet Trouble

check LAN connec-

tions.

Service Required

(Press [1] for more infor-

mation)

Indicates Low Battery, System Trouble, System Tamper or RF Jam

detected.

Call for service.

Loss of AC Power If the building and/or neighbourhood has lost electrical power,

the system will continue to operate on battery power for several

hours.

Check AC connection.

Call for service.

Telephone Line Fault The system has detected that the telephone line is discon-

nected.

Call for service.

Failure to

Communicate

The system attempted to communicate with the monitoring sta-

tion but failed. This may be due to a telephone line fault.

Call for service.

Module/Sensor Fault The system is experiencing difficulties with one or more module/

sensor on the system. Continue to press [5] to navigate through

the zone, keypad, and siren fault menus.

Call for service.

Module/Sensor Tamper The system has detected a tamper condition with one or more

module/sensor on the system. Continue to press

[6] to navigate

through the zone, keypad, and siren tamper menus.

Call for service.

Module/Sensor Low

Battery

The system has detected a low battery condition with one or

more module/sensor on the system. Continue to press

[7] to

display the zone(s), wireless key(s), keypad(s), siren(s) and prox

tag(s).

See section 22.1 Siren

and Keypad Display

Test. Call for service.

Loss of Time & Date If complete power was lost (AC and Battery), the time and date

will need to be re-programmed. Press

[,].

Reprogram Time &

Date.

Blank Display / No

Response

Keypad battery may have discharged beyond the usable level. Replace battery (call

for service if trouble

not cleared).

“Panel Response Not

Received” message

The keypad has lost wireless communication with the panel.

Occasional display of this message may be caused by local radio

frequency interference.

If trouble persists, call

for service.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Alexor WT8989 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Alexor WT8989