Alexor PC9155D-433 Spécifications Page 34

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 50
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 33
Enrolling additional wireless keypads (WT5500)
Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898])
- the display will read ‘Wireless Enrollment Mode’
Step 2 – Press and hold the [1] and [*] keys simultaneously
- the display will indicate the serial of the keypad
Step 3 – Press [*] to confirm the correct device
Step 4 – Enter the slot number of the keypad [1, 2, 3 or 4]
Step 5 – Repeat Steps 2-4 to enroll additional keypads
Notes:
- if the display does not indicate the serial number of the desired keypad to be enrolled, press [#] and
repeat Step 2
- the keypad enrolled during initialization will automatically occupy Slot#1. Do not attempt to enroll
another keypad to this slot number unless the initial keypad was deleted.
- if the slot number entered in Step 4 is already occupied with a different serial number, the keypad will
prompt to enter [*] to replace with the new serial number or [#] to keep the previous device and return to
the slot number entry screen
- up to four WT5500 keypads may be enrolled per PC9155 system
Enrolling Sirens (WT4901, WT4911)
Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898])
- the display will read ‘Wireless Enrollment Mode’
Step 2 – Press and hold the tamper or insert the batteries in the siren
- the display will indicate the serial of the keypad
Step 3 – Press [*] to confirm the correct device
Step 4 – Enter the slot number of the siren [1, 2, 3 or 4]
Step 5 – Repeat Steps 2-4 to enroll additional sirens
Notes:
- if the display does not indicate the serial number of the desired siren to be enrolled, press [#] and
repeat Step 2
- a total of four combined WT4901 and WT4911 may be enrolled per PC9155 system (i.e. WT4901x2
and WT4911x2)
- if the slot number entered in Step 4 is already occupied with a different serial number, the keypad will
prompt to enter [*] to replace with the new serial number or [#] to keep the previous device and return to
the slot number entry screen
Vue de la page 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Commentaires sur ces manuels

Pas de commentaire